Temperature Sensor - Western SPC07-IP2 Manual Del Usuario

Self-management at battery voltage thresholds with Lamp on all night:
The lamp is active all night.
Load B manages the energy saving of the lamp (See time diagram) by setting
a reduction in luminous flux depending on the battery voltage. If the IR
sensor is connected, at the detection of the person under the street lamp,
ON
the lamp flow will be set to 100% for 2 minutes.
1 2 3 4 5 6
off|on|off|on
WARNING: The configurations in the table are valid for controllers with software versions 1.0 (see image in the previous page to
*
understand the version of your SPC07-IP2).
Recharge connection

Temperature sensor

connect only if battery distance is
grater then 3 meter.
After having connected battery and module as you can see in the scheme on the left side, verify that the
signaling green LED in ON when the PV module is exposed to sunlight; this shows that the PV module is
supplying current to the battery.
Terminals description:
+Pan / -Pan
+Batt / -Batt
+LoadA / -LoadA
+LoadB / -LoadB
Text
Sens
AuxIR
SPC07-IP2
User manual
2 min
Gnd
Text
Gnd
Sens
+LoadA
-LoadA
AuxIR
+LoadB
-LoadB
SPC07-IP2
PV module input
Battery input
Load A output
Load B output
Temperature sensor input (optional)
Input of IR command / remote load
Auxiliary output - 12V Max 100mA power supplying IR sensor
5
IR Sensor
PX01
12V
WesternCO GND
DIMMER
WLIGHT
+Pan
-Pan
+Batt
-Batt
-
EN
BLU
Gnd
Sens
VERDE/GREEN
+LoadA
-LoadA
ROSSO/RED
12V Aux Max 100mA
+LoadB
-LoadB
SPC07-IP
+
-
+
12V