Electricity and heat
•
The appliance is not intended
to be operated by means of an
external timer or separate remote
control system.
•
Always remove the plug from the
socket when the appliance is not in
use.
•
Always remove the plug from the
wall socket by pulling on the plug
not the power cord.
•
Use an earthed wall socket.
•
Never pull the power cord to move
the appliance.
•
Never move the appliance while it is
in use.
•
Do not use the appliance if the
appliance or the power cord is dam-
aged. Have a damaged power cord
replaced by a qualified electrician.
•
Make sure that the appliance, the
power cord and the plug do not
come into contact with sources of
heat such as a hot hob or naked
flame.
•
Make sure that the appliance, the
power cord and plug do not come
into contact with water, other fluids
or chemicals.
•
Do not pick up the appliance if it
falls into water. Immediately remove
the plug from the wall socket. Do
not use the appliance anymore.
•
The appliance and its parts
become hot while the appliance is in
use. To avoid being burnt, take care
when touching the appliance and
its parts.
•
The appliance must be able to
dissipate its heat to avoid a risk of
fire. Make sure that the appliance
has sufficient space around it, and
does not come into contact with
flammable material. The appliance
must not be covered.
8
U.K. WIRING
INSTRUCTIONS
The wires in the mains lead are
coloured in accordance with the
following code:
• BLUE
• BROWN
• GREEN/ YELLOW
As the colours of the wires in the mains
lead of this appliance may not
correspond with the colour markings
identifying the terminals on your plug,
proceed as follows:
•
The BLUE wire must be connected
to the terminal marked with the let-
ter N or coloured black.
•
The BROWN wire must be
connected to the terminal marked
with the letter L or coloured red.
•
The GREEN/YELLOW wire must be
connected to the terminal marked
with the letter E (or earth symbol) or
coloured GREEN or GREEN/
YELLOW
WARNING: THIS APPLIANCE MUST BE
EARTHED
With this appliance, if a 13A plug is
used a 13A fuse should be fitted. If any
other type of plug is used, a 15A fuse
must be fitted either in the plug or at the
distribution board.
NEUTRAL
LIVE
EARTH