Permissible Multiengines; Mounting The Multitool - Stihl RL-MM Manual De Instrucciones

Permissible MultiEngines

Only MultiEngines which have been
supplied by STIHL or specially approved
for use with this MultiTool may be used.
This MultiTool may only be used in
combination with STIHL MM 55.
RL-MM

Mounting the MultiTool

Removing existing MultiTools
: Wear work gloves.
: Remove the hitch pin and pull the
MultiTool (if fitted) off the shaft.
: Clean the outside of the gearbox if
necessary.
Also refer to chapter "Mounting the
MultiTool" in the MultiTool instruction
manual.
English / USA
Checking Position of Gearbox
1
3
To reduce risk of injury from MultiTool
rotating in the wrong direction, check
that position of gearbox is correct and
adjust if necessary.
The shaft (1) must be below the drive
tube (2) so that the MultiTool rotates in
the direction of the arrow (3).
2
13