Safety Devices; Command And Control Devices - IPC IWD-H Manual De Instrucciones

FILLING THE DETERGENT
TANK
The detergent tank is not in-
cluded with the water cleaner.
Use a container that is suitable
for holding detergents.
The water cleaner is designed
for the alternative use of two
different detergents from two
separate tanks (fig.2).
Detergent tanks are available
as optional accessories.
!
Warning
From the range of recommen-
ded products, choose the one
most suited to the washing job
to be done (fig. 3) and dilute
it with water according to the
instructions on the pack.
Ask your dealer for the cata-
logue of the detergents that
can be used depending on
the type of washing job to be
done and the type of surface
to be treated.
After using a detergent, the
detergent intake circuit must
be flushed out with clean
water.
FILLING THE WATER SOFTENER TANK
The water softener tank is not included with the water cleaner.
Use a container that is suitable for holding anti-lime agents.
Fill the tank with water softener solution. Use only products
recommended by the manufacturer and/or dealer. Follow the
instructions given on the packaging meticulously. (Do not dis-
perse water softener in the environment).

COMMAND AND CONTROL DEVICES

!
Warning
Before connecting the machine to the water supply and to the
power mains, it is essential to know the function of the cleaner's
English
command and control devices.

SAFETY DEVICES

The safety devices protect the user and the appliance. They
must not be tampered with or used for other than their desi-
gnated purpose.
Safety valve: protects the high pressure hydraulic circuit in
the event of a by-pass valve malfunction or if the hydraulic
circuit is blocked.
The safety valve is calibrated by the Manufacturer and sealed.
Operations involving the safety valve must be performed by a
technical service centre only.
FIG. 2
Safety device on lance handgrip: Prevents the trigger on the
handgrip from being operated accidentally.
Thermal cutout: stops the high pressure washer if the electric
motor overheats.
WATER CIRCUIT CONNECTION
Connect the feed hose to the
mains (fig. 5A) and to the ho-
setail on the cleaner (fig. 5B).
Check that the pressure and
quantity of the water supplied
by the mains are sufficient for
the cleaner to work properly:
2 to 8 BAR (29 to 116 PSI).
Maximum temperature of
feeding water 50°C (122°F).
FIG. 3
Connect the high pressure
hose to the cleaner (fig. 5C)
and to the lance (fig. 6).
!
Danger
The cleaner must operate
with clean water. Dirty or
sandy water, corrosive che- micals and solvents can
cause severe damage to
the cleaner.
!
Danger
Never suck up liquids contai-
ning solvents or acids in the
pure state, for example petrol,
paint solvents or diesel. The
spray mist from the lance is
highly inflammable, explosive
and poisonous.
Failure to respect the above
absolves the manufacturer
of all liability and repre-
sents negligent use of the
FIG. 4
product.
- 23 -
FIG. 5
FIG. 6