b. Installation of the monitor
1. Put the wall carrier
2. Connect the wires coming from the
outdoor station and the opening
system.
3. Connect the adaptor plug
back of the monitor (without
connecting it to the power supply).
4. Fix the monitor
carrier
.
2
5. Check that the installation is
complete and connect the adaptor
to the power supply.
NB : if the power supply cable is cut, check the polarity (black wire and black wire with grey
edging).
5. USAGE
b. Using the videophone
thirty seconds. Once the visitor has been identified, press on the
NB : Pressing this key just once is enough to establish communication with the outdoor station.
off using the
key.
in place.
2
to the
3
to the wall
1
3
1
2
3
7EN
2
1
a. Settings
Three settings can be adjusted
from the side of the monitor:
Ringer selection:
With the monitor off, press
the
key repeatedly to
select one of the three
options.
key to establish communication.