Size Of Mounting Plate; Installation Procedures; Preparation Work Before Installation; Gate Opener Installation - DIMOEL SL1000DC Manual De Instrucciones

3.2.2 Size of mounting plate

Figure 3

3.3 Installation procedures

3.3.1 Preparation work before installation

Please make sure that the sliding gate is correctly installed, the gate rail is horizontal,
and the gate can be manually moved smoothly before installing the gate opener.
Cable installation
In order to guarantee the normal operation of the gate
opener and protect the cables from damages, please
bury the motor & power cable and controlling cable
separately with two PVC tubes.
Concrete pedestal
The motor needs a solid base to sure this estability.
Please cast a concrete pedestal with the size can be
400mm x 250mm, depth be 200mm in advance, so as
to firmly install DKC500DC gate opener. The pedestal
has to be well level, parallel with de door and a 70
Please make sure the
mm. from the door.
distance between the gate and gate opener is
proper before pouring the pedestal.
After installation and fastening wires it is recommended to isolated the
entrance of wires to avoid humidity or insects penetrating and they can
interfere in the right motor function.

3.3.2 Gate opener installation

a) Remove the plastic cover on the gate opener before installation and keep the
fasteners;
7