Vision VGA TECHSPLITTER Manual De Usuario página 5

OPERATING INSTRUCTIONS
Connect as shown:
SPECIFICATIONS
• Dimensions: 145 x 45 x 28mm
• Weight: 200g
• Packaged dimensions: 180 x 150 x 60mm
• Packaged Weight: 500g
• External 230v Power Transformer (110v on US version)
• Supports DDC, DD2, DDC2B
• I/O Interface:
• TTL Compatible; Vertical Sync & Horizontal Sync, Analog Signal;
Supports sync on green
• I/O Signal:
• Video: TTL level Positive Analog 0.7vp-p/75 Positive
• Sync: Separate sync, TTL Level
• Horizontal sync. Positive/Negative
• Vertical sync. Positive/Negative
• Composite sync, TTL level
• Maximum resolution: 1920 x 1440
• Horizontal frequency: 30-100Hz
• Vertical frequency: 43-120Hz
• Bandwidth: 250MHz
• Recommended Transmission distance:
• Splitter Input: Cable should be no longer than 7.5m (25')
• Splitter Output: Max 75m (250') at 800x600 (SVGA), but reduces with higher resolutions
NB1: If you connect a DDC type monitor to the output port, all other monitors must be able to support the highest
resolution that the DDC monitor can support.
NB2: This product is designed for VGA, SVGA, and Multisync monitors. They are not suitable for CGA, EGA, or Mono
type monitors that use digital video signals.
NB3: Theoretically there is no limit to the number of splitters that can be daisy-chained, but the quality will
deteriorate as you chain further away from the source.
Note: Because we are committed to improving our products, the details above may change without prior warning.
3