Setting The Timer; Drip Stop Function; Cleaning And Maintenance; Cleaning After Every Use - Philips HD7753 Manual Del Usuario

5.4 Setting the timer

The timer enables you to program the time for
starting the coffee-making process.
Keep the PROGRAM button pressed until
1
the program button starts flashing and 0:00
appears on the display (Fig. 23).
Press the HOUR button repeatedly to set the
2
hour. (Fig. 24)
• The appliance beeps each time you press
the button.
Press the MINUTE button repeatedly to set
3
the minutes. (Fig. 25)
The appliance beeps each time you press
•
the button.
• The display shows the set timer time.
Select the number of cups you want to
4
brew. (Fig. 26)
Select the desired coffee strength (mild,
5
medium or strong). (Fig. 27)
Press the PROGRAM button to save the
6
settings. (Fig. 28)
• The PROGRAM button lights up
continuously.
• The clock time appears on the display.
To interrupt the process, press the
7
PROGRAM button again.
• The PROGRAM button light goes out.
Note:
D
If you want to change the set timer time, press
the PROGRAM button. The PROGRAM button
indicator starts flashing again. Now you can set
the new timer time by pressing the HOUR and
MINUTE buttons.
Note:
D
If you want to brew coffee with ground coffee,
press the pre-ground coffee button to switch off
the grinder before you select the number of cups.
10

5.5 Drip stop function

The drip stop function enables you to remove
the jug from the coffeemaker before the brewing
process is finished. When you remove the jug, the
drip stop stops the flow of coffee into the jug.
Note:
D
The brewing process does not stop when you
remove the jug. If you do not put the jug back
in the appliance within 20 seconds, the filter
basket overflows.
6 Cleaning and
maintenance

6.1 Cleaning after every use

Warning:
B
Never immerse the appliance in water or any
other liquid, nor rinse it under the tap.
Set the on/off switch on the back of
1
the appliance to 'O' to switch off the
appliance. (Fig. 29)
Remove the mains plug from the wall socket.
2
Wipe the outside of the coffeemaker with a
3
damp cloth.
Clean the filter basket and the permanent
4
filter with hot water and some washing-up
liquid.
6.2 Cleaning the coffee bean
chute
You have to clean the coffee bean chute every 1
to 2 weeks, depending on the frequency of use.
Put the mains plug in the wall socket.
1
Set the on/off switch on the back of
2
the appliance to 'I' to switch on the
appliance (Fig. 2).
• The start/standby button and the display
light up.
Press the start/standby button and then
3
remove the mains plug from the wall socket.