Troubleshooting Guide - Haier AQUA FONTANA WDBF01 Manual De Usuario

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

TrOuBLESHOOTING GuIdE

Problems are sometimes caused by simple "faults" that can be easily
corrected with or without the help of a service technician by first checking
a few basic remedies. The following can be helpful for diagnosis of the
problem and solution:
Appliance does not operate
• I s the power supply cut off? Check another electrical appliance at the electrical
outlet, or check fuse on the back of the unit. If needed, replace the fuse with a
250V 8AMP.
Note: Remove power cord from outlet before replacing fuse.
Cooling efficiency is poor
• C heck if the unit is placed close to stove or heater. Place the unit away from
these heat sources.
• C heck if the unit is placed close to wall. leave some space between the back
of the unit and the wall.
• A re there any unnecessary objects around the unit? Remove all the objects.
• C heck if the ambient temperature is too high. Regulate the ambient
temperature properly.
Heating efficiency is poor
• C heck if the heater switch is set to the "off" position. Set the switch to "oN."
• C heck if the ambient temperature is too low. Regulate the ambient
temperature properly.
Generates abnormal noises
• I s the appliance placed on an uneven floor? Position the appliance on a firm
and even surface.
• I s there an obstacle at the back of the appliance? Remove the obstacle.
Pump does not work
• I f front door is not closed, the pump will not operate. Please make sure
door is closed.
Drinking water does not flow well
• C heck if the water tank is empty. Make sure that the pump operates properly
and that the water bottle has enough water.
• C heck if the water flow pipe and the lever are clean and unblocked.
Clean the pipe and the lever.
English
10
Tabla de contenido
loading

Tabla de contenido