Dry Ironing - Taurus SENSITY NON STOP Manual De Instrucciones

- Do not use the appliance if the accessories or
parts are not fastened together properly.
- Use the appliance handle/s, to catch it or move
it.
- Respect the MAX level (Fig. 2)
- Disconnect the appliance from the mains when
not in use and before undertaking any cleaning
task.
- This appliance is for household use only, not
professional or industrial use.
- This appliance should be stored out of reach
of children and/or those with reduced physical,
sensorial or mental abilities or who are unfamiliar
with its use.
- Do not store or transport the appliance if it is still
hot.
- To ensure that the iron functions correctly, keep
the iron face smooth and do not hit it against
metallic objects (for example, the ironing board,
buttons, zips...)
IMPORTANT: Replace the ANTISCALE filter after
every 30 tank fills approximately or use deminera-
lised water when the filter is spent.
- The use of demineralised water is recommen-
ded, especially if the water in your area contains
any type of grit or is "hard" (contains calcium or
magnesium).
N.B.: It is normal to hear a pumping sound as the
water is pumped into the steam generator.
- Never leave the appliance connected and
unattended if is not in use. This saves energy and
prolongs the life of the appliance.
- Do not use the appliance on any part of the
body of a person or animal.
- Do not use the appliance with pets or animals.
- Turn the thermostat control to the minimum
(MIN) setting. This does not mean that the iron is
switched off permanently.
Service:
- Make sure that the appliance is serviced only by
specialist personnel, and that only original spare
parts or accessories are used to replace existing
parts/accessories.
- Any misuse or failure to follow the instruc-
tions for use renders the guarantee and the
manufacturer's liability null and void.
Instructions for use
Before use:
- Remove the appliance's protective film.
- Prepare the appliance according to the function
you wish to use.
Filling with water:
- It is essential to have filled the deposit with
water to be able to work with steam.
Remove the tank from the appliance by pressing
the tank release button (D) located at the base of
the tank or fill the tank through the filling hole (A).
- Fill the deposit taking care to observe the MAX
level (Fig. 2).
- Replace the tank in its housing, ensuring that it
is well fitted.
Use:
- Uncoil the cable completely and lift the handle
before plugging it in.
IMPORTANT: Check that the water tank is cou-
pled correctly to the anti-scale filter on the inside
before switching on the appliance (Fig. 1)
- Fill the deposit taking care to observe the MAX
level (Fig. 2)
- Connect the appliance to the mains. (Fig. 3)
- Switch the appliance on, setting the temperature
and steam control (E) to the position that corres-
ponds to the desired temperature (Fig. . (Fig. 4)
- The pilot light (B) comes on (Fig. 3)
- Do not use temperatures higher than those
indicated on the garments to be treated.
● Temperature for synthetic fibres (Polyester,
Nylon...).
●● Temperature for silk, wool. (Minimum tempera-
ture for ironing with steam)
●●● Temperature for cotton.
Max Temperature for linen.
- If garment has various kinds of fibres, select the
temperature for the fibre that requires the lowest
temperature. (For example, select the tempera-
ture for polyester for an article made out of 60%
polyester and 40% cotton).
- Wait until the pilot light (B) has gone out which
will indicate that the appliance has reached an
adequate temperature.
- Press and hold the steam button (C) for 10
seconds. During use the pilot light (B) will au-
tomatically flash on and off, thus indicating that
the heating elements are operating in order to
maintain the desired temperature.

Dry ironing:

- The appliance has a steam and temperature
control (E) which when set to the MIN position
allows dry ironing (no steam).
Steam Ironing:
- It is possible to iron with steam whenever the
deposit is filled with water and the adequate
temperature is selected.