ShelterLogic MaxAP Guía De Ensamblaje página 4

2. AsseMBle rooF FrAMe
NOTE: Swedged tubes insert into plain ends at the crimp marks.
3. AsseMBle leGs & AttAcH to rooF FrAMe
A. Attach all legs to one side first. Let the other side of roof frame rest on the ground.
B. Repeat for opposite side.
A
4. AncHor tHe FrAMe
There are four holes on each base foot that the anchor can go into.
A. Select a hole in each base foot. Insert each anchor (10431) at an angle into
the ground until the round head is touching the base foot. These anchors
prevent the canopy from shifting. Insert one anchor into all 4 base feet.
This is a temporary spike anchor. Not intended for permanent use.
B. To securely anchor canopy, Accessory Anchoring Kit #10073 is
recommended.
B
Page 4
Swedged Tubes Connections
13103 13104
Crimp Marks
Leg Pole Assembly
Anchoring Base Feet
10431
13105
13103
802916
13103
802916
05_23521_0E