SKYLOTEC MARK 1 PLUS Instrucciones De Uso página 11

• Regular periodical inspections should be carried out
by an authorised person at least once a year. For this
purpose an inspection record should be established
(see the backside of these instructions).
Furthermore we would sincerely recommend one set
of equipment is used by one person only as its history
of use is best traced and understood in this way.
• Before each use it is obligatory to check the de-
scender and verify that all its components (handle,
jamming cleat, flanges) are faultless and in good wor-
king condition. Packing, storage, maintenance and
cleaning Each product is packed with its INSTRUC-
TIONS FOR USE. Proper maintenance and storage
are imperative to ensure correct functioning of the
product (as well as all your equipment) and thus your
safety. Clean the product with a brush under running
cold water of domestic supply. If the stains persist,
clean it in warm water (maximum 30°C) with ordina-
ry soap. Then rinse thoroughly, wipe it with a towel
and dry naturally in a shaded ventilated place away
from sources of heat. If needed, lube sparingly the
moving joints of the jamming cleat and handle with
silicon based oil.
Temperatures While it is allowed to use this product
within the temperature range from -20°C to 60°C, it
is advisable to stock it in a dry place at room tempe-
rature.
Lifetime It is impossible to indicate the exact lifetime
of this product for it depends on frequency and mode
of application, on environment where it is used (mari-
ne, cave, corrosive atmosphere), and on mechanical
wear or damage. Provided its correct use (in con-
cordance with these instructions), the lifetime of the
product at average use is expected to be 7 years.
Guarantee and its limitations This product is gua-
ranteed for 3 years from purchase against any faults
in materials or manufacture. The guarantee does not
apply in cases of misuse, normal wear and tear, un-
authorized modifications or alterations, improper use,
improper maintenance, accident, negligence, dama-
ge, or if the product is used for a purpose it was not
designed for. If you discover a defect, you should
return the product to the reseller you purchased the
product from or directly to SKYLOTEC.
SKYLOTEC is not responsible for the consequen-
ces of direct, indirect, accidental or any other type
of damage resulting from the use of its products.
DE
VOR DEM GEBRAUCH MÜSSEN DIESE GE-
BRAUCHSANWEISUNGEN AUFMERKSAM GE-
LESEN WERDEN
EN
11