Tabla de contenido
"ICE FULL"
indicator lights up
Ice collects together
The ice-making cycle
seems normal but no
ice is produced
Poor ice-making
result
1. Ice basket is full and the
infrared light is blocked by
the ice.
2. Infrared light-emitting
diode & light-receiving diode
do not work.
Making ice takes too much
time.
The water in the water
reservoir is at too low
temperature.
The ambient temperature or
water temperature is too
high.
Refrigerating system leaks.
Refrigerating system blocks.
1.Poor heat dissipation.
2.The water temperature is
too high.
3.The ambient temperature is
too high.
1. Remove the ice from ice basket.
2a. Wipe unknown objects on the
infrared light-emitting diode &
light-receiving diode and restart the
ice maker.
2b. Call Customer Service if the
infrared light-emitting diode &
light-receiving diode still cannot
work after wiping unknown objects
on and restarting the ice maker.
Stop making ice and restart the
ice-making cycle after the ice
melts.
Fill the water reservoir with water
ranges between 8℃ and 25℃.
Start the ice-making cycle at
environment with an ambient
temperature less than 32°C and
fill the water reservoir with some
cold water.
Call customer service.
Call customer service.
1. Leave a 6-inch clearance on all
sides of the ice maker for proper
ventilation.
2. Fill the water reservoir with
water ranges between 8℃ and
28℃.
3. Operate the ice maker at a
environment with an ambient
temperature between 10℃ and
32℃.
10
Tabla de contenido
Solución de problemas
