FOR THE FIRST USE
As there is manufacturing residue or oil remained in the toaster or heat element, it usually
emits the odor for the first use. It is normal and will not occur after several times use.
Before toasting the first slice of bread it is strongly suggested to operate the appliance
following below instructions, except without bread.
OPERATION:
1. Put bread slice into the bread slot, it can be inserted two slices at most every time. Only
the regular slice can be placed into the bread slot.
Note: Make sure the crumb tray is completely positioned in place before using.
2. Plug the power cord into the outlet.
3. Set color control knob to your desired color. There is 7-position level, the lowest is
white and the highest is puce. The bread slice can be toasted to golden color at the position
of "4".
Note: 1) Toasting color for one side is darker than that for double bread at the same level.
2) If toasted continuously, toasting color for the latter bread is darker than the color
of previous cycle at the same level.
4. Press carriage handle down vertically until it is positioned in place, the indicator of
Cancel will be illuminated and toasting begins. Once the bread has been toasted to the
preset color, the carriage handle will be automatically sprung up, and you can remove the
bread readily.
Note: The carriage handle can only be latched when the appliance connects to the power supply.
5. During the toasted process, you may observe the toasting color. If it is satisfactory, you
may interrupt the toasting process by pressing the Cancel button at any time.
CAUTION:
1. Remove all protective wrapping prior to toasting.
2. If toaster starts to smoke, press Cancel button to stop toasting immediately.
3. Avoid toasting the food with extremely runny ingredients such as butter.
4. Never attempt to remove bread jammed in the slots without unplugging the toaster from
the electrical outlet first. Be sure not to damage the internal mechanism or heating
3