Selecting Station; Automatic Memory Storing; Program Scanning; Station Storing - Lenco CS-315 Manual Del Usuario

SELECTING STATION

Press 8 / 9 button (2) shortly to activate
automatic seek function. Press for several
seconds until "MANUAL" appears on the
display, the manual tuning mode is selected.
If both buttons have not been pressed for
several seconds, they will return to seek
tuning mode and "AUTO" appears on the
display.
AUTOMATIC MEMORY STORING &

PROGRAM SCANNING

-

Automatic memory storing

Press AS/PS button (6) for several
seconds, the radio searches from the
current frequency and checks the signal
strength until one cycle search is finished.
And then the strongest stations are
stored into the corresponding preset
number button.
- Program scanning
Press AS/PS button (6) shortly to scan
preset station which is stored in button
16(1~6).

STATION STORING

Received a desired station then press one
of the preset button (16) (1 to 6) for 2
seconds, current station will be stored into
the number button.
RDS FUNCTION
- Setting RDS mode
Press AF(REG) button (9) and release
immediately to switch on or off the AF
mode.
Whenever AF is switch on, symbol "AF"
appears on the display.
Program name is displayed on receiving a
RDS station.
"AF" starts blinking if the broadcasting
signal getting worse.
- Regional Program Operation
Press AF(REG) button (9) for several
seconds to switch on or off region mode.
Some broadcasting stations change their
program from normal broadcasting to
regional broadcasting for a certain time
period. When region is on, the current
listening program remains unchanged.
When region is off, it allows the reception
moves to the regional station.
- Using PTY to Select Program
Press and hold PTY button (7) 1 time.
Then press preset button(16). You can
select the program type as below:
1# button: NEWS/AFFAIR/INFORM
2# button: EDUCATIO/DRAMA/SPORT
3# button: VARIED/CULTURE/SCIENCE
4# button:
PR/WEATHER
5# button: PHONE IN/SOCIAL/RELIGION
6#
TRAVEL/LEISURE/DOCUMENT
Press and hold PTY button (7) 2 times.
Then press preset button(16). You can
select the program type as below:
1# button: ROCK MUS/POP MUSI
2# button: LIGHT MU/EASY MUS
3# button: OTHER MU/CLASSICS
4# button: COUNTRY/JAZZ MUS
5# button: NATIONAL/OLDIES
6# button: FOLK MUS
- Listening to Traffic Announcement
TA button (10) is operated as follows:
When pressed, it is engaging whether TA
mode on or off.
When TA mode, is on and a traffic
announcement is transmitted:
When the unit was in CD (MP3) USB/SD
mode or AUX IN mode, it will switch
temporarily to radio mode.
If the volume level was under the
threshold point it will be raised to the
threshold point. But the user changed the
volume level, which was more than the
threshold point (min. TA volume level. You
can setting the TA VOL level in menu by
press SEL button ), it will be set to the last
level.
When TA mode is on, TA of individual
segment is turned on.
When a TP station is received, TP of
9
ECONOMY/CHILD
button: