BEFORE FIRST USE
PLASTICIZER WARNING
The surface of the appliance can become very hot during operation, which is likely to cause
blemishes, discolor or stains on the tabletop. It is recommended to place non-plastic pads between
the appliance and the table top.
1. Unpack the appliance and place it in a flat horizontal countertop and wipe the outer surface and
non-stick plate with a wet soft cloth. Plug the appliance into the mains supply and preheat. It is
recommended to coat a layer of vegetable oil before preheating. This helps to protect the non-stick
surface. Some odor may be felt during initial preheating; this is normal and it will disappear after
one or two uses.
2. Before use check if the cooking plate is clean and free from dust and food particles. Wipe with a
damp cloth if necessary.
HOW TO USE YOUR GRIDDLE
1. Connect the appliance with rated voltage and adjust the temperature according to your
requirement, the power indicator turns on in red and the appliance starts to preheat. When reach the
preset temperature, the red indicator turns off.
2. Usually it takes approximately 10 minutes to reach the preset temperature. Now you can put the
food onto the cooking plate.
3. Make sure the drip tray is assembled in the proper position and then put the prepared food on the
cooking plate. It is recommended to use oven mitts and pot holder to reduce the risk of being hurt
by touching the hot surface.
4. The grilling time should be approximately 20 minutes. Exact grill time vary according to your
personnel taste and the fillings.
5. Once the cooking process has finished, remove the grilled food with a plastic or wooden spatula.
Never use metal utensils as this will damage the non-stick coating.
6. Unplug the power cable after the food is prepared (note: if the socket is switch type, turn it off)
Note: The cooking plate shall be cooled for some time as it may be very hot.
7. Remove the drip tray for cleaning after it is cooled completely. It is not recommended to reuse
4