7
Activation of the security lock/unlock of the blades:
1.
To activate the security lock of the blades, keep the trigger pulled until the shears emit
an audible tone (1 beep). With this operation, the blades close. By pulling the trigger, the
blades don't move.
2.
To deactivate the security lock of the blades, quickly pull the trigger twice, repeatedly.
The shears emit and audible tone (1 beep) and the blades open. Now the blades close
whenever the trigger is pulled.
General instructions
Normally, the cuttings are even and smooth causing no damage to the plants. If an abnormality
occurs, simply release the trigger and the blade will open in the maximum position to avoid
personal injury or property damage. Do not use the device on rainy days. Before using, please
check if the blade is sharp. If the blade is blunt, be sure to sharpen the blade to obtain optimal
performance and avoid damages to the shears. Always close the blades before switching the
shears off, in order to avoid any damages to things or people.
130
Art. 310
Pruning shears Vulcano E-25 TR
Usage
Art. 310
Pruning shears Vulcano E-25 TR
Usage
Charging the battery
Do not expose the battery to extreme conditions such as high temperatures or shocks.
Otherwise, personal injury will result from leakage of the electrolytic solution.
Before using or recharging the batteries, make sure that the battery and the battery
charger are both dry.
•
At the time of delivery, the battery of this product is not fully charged. Therefore, the
•
user must fully charge it before using it for the first time.
•
Charge the battery when the power indicator light is lit.
•
Do not charge the battery for a long time, and avoid using all the power in the battery, other-
wise the battery will be damaged.
•
If the battery life of the fully charged battery is significantly shorter, it proves that the battery
has been used up and must be replaced. Users can only use original batteries. In order to
obtain a new battery, users can contact a local reseller or Stocker srl.
•
Always keep in mind the applicable safety instructions, environmental regulations and environ-
mental information.
•
Place the charger in a room between 10 °C and 22 °C at room temperature to prevent
moisture ingress.
•
Check if the switch is in the off position.
•
Connect the charger's adapter to the appropriate connector of the battery pack.
•
Make sure the power supply matches the rating on the charger and adapter.
•
When the red light on the charger is on, it indicates that the battery is charging, and the green
light indicates that charging is complete. The average charging time is 2,5 hours.
•
When charging is complete, unplug the connector from the power source and disconnect the
connector from the battery.
•
Please ensure that the battery is charged at least once every six months when the battery is
not in use for a long time.
Sign up to our newsletter and keep up to date with our latest news www.stockergarden.com/newsletter
7
131