• II. Shared Bus
If several UMX-02/0 units are interconnected by
means of the expansion connector of the audio
bus, this parameter must be confi gured.
1. Select the option Shared Bus from the
Common Options menu.
2. Press MENU/OK.
3. Using the numeric keypad, enter the address
of each of the UMX-02/0 units that share the
5
bus. Press
to separate each address from
the next one.
4. It is also necessary to enter the address of the
UMX-02/0 which is being confi gured.
5. Press MENU/OK.
• III. Language
This enables the user to change the language of
the menus.
1. Select the option Language from the Common
Options menu.
2. Press MENU/OK.
3. Using the navigation keys, select a language
5
and press
.
4. Press MENU/OK to save the data.
• IV. Password
Use this option to change the password. The
system supports values from 1 to 9999.
The default password is 1234.
1. Select the option Password from the Common
Options menu.
2. Press MENU/OK.
3. Enter the existing password and press MENU/
OK.
4. Enter the new password and press MENU/
OK.
5. Enter the new password once again and press
MENU/OK.
UMX-02/0 v1.0
UMX-02/0
• V. Message Length
Use this option to establish a maximum message
length.
1. Select the option Message Length from the
2. Press MENU/OK.
3. Using the navigation keys, select a maximum
4. Press MENU/OK to save the data.
Common Options menu.
message length value and press key
60 seconds
120 seconds
240 seconds
Unlimited
ENGLISH
5
.
Eng
77