BUILT-IN MICROWAVE/OVEN COMBINATION SAFETY
We have provided many important safety messages in this manual and on your appliance. Always read and obey all safety
messages.
This is the safety alert symbol.
This symbol alerts you to potential hazards that can kill or hurt you and others.
All safety messages will follow the safety alert symbol and either the word "DANGER" or "WARNING."
These words mean:
DANGER
WARNING
All safety messages will tell you what the potential hazard is, tell you how to reduce the chance of injury, and tell you what can
happen if the instructions are not followed.
Tools and Parts
Gather the required tools and parts before starting installation.
Read and follow the instructions provided with any tools listed
here.
Tools Needed
Phillips screwdriver
■
Measuring tape
■
Drill (for wall cabinet installations)
■
1" (2.5 cm) drill bit (for wall cabinet installations)
■
Level
■
Flat-blade screwdriver
■
Parts Needed
UL listed or CSA Approved conduit connector
■
UL listed wire connectors
■
Warming Drawer Deflector Kit (for ovens installed above a
■
warming drawer):
Color
Size
White
27"
White
30"
Black
27"
Black
30"
Stainless Steel
27"
Stainless Steel
30"
Black Stainless
27"
Steel
Black Stainless
30"
Steel
Bronze
30"
To order, see the "Assistance or Service" section of the Use and
Care Guide.
2
Your safety and the safety of others are very important.
INSTALLATION REQUIREMENTS
Type
Warming Drawer
Deflector Kit
Combo
W10510613
Combo
W10510614
Combo
W10531009
Combo
W10531010
Combo
W10536338
Combo
W10536339
Combo
W10888988
Combo
W10727416
Combo
W11123007
You can be killed or seriously injured if you don't immediately
follow instructions.
You can be killed or seriously injured if you don't follow
instructions.
Flush Installation Kit (for Single and Double installed at flush
■
installation):
Color
Size
White
27"
White
30"
Black
27"
Black
30"
Stainless Steel
27"
Stainless Steel
30"
Black Stainless
27"
Steel
Black Stainless
30"
Steel
Bronze
30"
To order, see the "Assistance or Service" section of the Use and
Care Guide.
Parts Supplied
Four #8–14 x 3/4" (19 mm) screws
■
Bottom vent
■
Two #8–18 x 3/8" (9.5 mm) screws — bottom vent
■
Check local codes. Check existing electrical supply. See the
"Electrical Requirements" section.
It is required that all electrical connections be made by a
licensed, qualified electrical installer.
Type
Flush Installation
Kit
Combo
W11173682
Combo
W11173684
Combo
W11173686
Combo
W11173692
Combo
W11173695
Combo
W11123004
Combo
W11173701
Combo
W11173704
Combo
W11123006