Idiomas disponibles
Idiomas disponibles
Installation
Installation
Installation must comply with all applicable
state and local statues, codes and ordinances.
Non-compliant installation may result in product
failure, property damage, and/or personal injury.
1. Install air volume control according to
instructions supplied with air volume control.
2. Connect inlet and outlet pipes as shown in
Figures 1 and 2.
To
Service
Figure 1: Typical Jet Pump Installation
Union
From Well
Relief
Valve
Figure 2: Typical Submersible Installation
Compression
Fitting
Control Box
(3 Wire Models Only)
Gate Valve
3. When installing tank in a system having a
submersible well pump, be sure that bleeder
orifices are installed and operating correctly.
See sub mer sible pump owner's manual for
more information.
NOTICE When using metal pipe with plastic
fittings, use only PTFE pipe thread sealant tape
on male threads.
Pressure
Gauge
Air Volume
Control
(TC2120)
Plastic
Tubing
Compression Fitting
Pressure
Gauge
Electrical
Disconnect
Air Volume
Control
(FPE238-2)
Pressure Switch
Discharge
Pipe
Relief
Valve
Regulator
Screw
Pump
To House
Service
146 0893
4
144 0893
