Description - Active T4-25 B Manual De Instrucciones

27- Be sure the cutting attachment is properly installed and
securely fastened.
28- Replacement or if the disk appeared cracked or damaged
in any way
29-Wear protective gloves when handling or performing
maintenance on the blade.
30- With the engine idling, the blade should not turn. If it
does, regulate the idle adjustment screw.
31- Transport the brushcutter motor still with cover the di-
sco fitted
1. Ignition switch (STOP).
2. Throttle trigger.
3. Throttle advance.
4. Choke.
5. Primer (fuel air purge ).
6. Fuel cap.
7. Fuel tank (only petrol).
8. Starter grip.
9. Air filter.
32- To avoid the risk of injury, stop the engine and blade
before removing material wrapped around the head or blade.
33- Always use a sharp blade, a dull blade is more likely to
snag and thrust. Replace a dull blade. DO NOT attempt to
sharpen.
34- Always stop engine and examine the blade after striking
any hard object.
35- In order to maintain performance and safety,be sure to
use original spare parts and accessories approved by the
manufacture.
36- When saw blade is used, fit the specific blade guard.

3. DESCRIPTION

10. Handle
11. Hook
12. Transmission tube
13. Clutch housing(ANTIVIBRATION)
14. Safety guard
15. Transmission
16. Gear head
17.
Blade
18. ACTIVE Nylon head
15
GB
ENGLISH
Only for EVOLUTION model:
19. Brushcutter attachment
20. Coupling sleeve
21. Transmission lever lock
ATTACHMENTS ON OPTION:
A. BENT PRUNER (35°)
B. HEDGE TRIMMER
C. STRAIGHT PRUNER