Kunft 17MX02 Manual De Instrucciones página 9

The purpose of the distance limiter is to make the microwave oven
away from the wall at a certain distance.
Take out all the packing. Carefully check whether there is damage
to the microwave oven. Such as:
a. the oven cavity is impacted or pressured.
b. the door is not flat; the switch is not smooth and flexible.
c. the metal Insulated mesh on the door is bended or deformed.
d. the power cord is loose.
IF YOU HAVE ANY OF THESE SITUATIONS ABOVE, CONTACT YOUR
NEAREST SERVICE CENTER APPROVED.
- Microwave ovens must be placed under dry and non-corrosiveness
environments, kept away from heat and humidity, such as gas
burners or water tanks.
- To ensure sufficient ventilation, the distance of the back of
microwave to the wall should be at least 10 cm, the side to the
wall should be at least 5 cm, the free distance above the top
surface at least 20 cm.
- The position of the oven shall be far from the TV, radio or antenna
to avoid disturbance. The distance should be more than 5 m.
- The appliance must be positioned so that the plug is accessible,
and must ensure a good grounding. In case of leakage, ground loop
can be formed to avoid electric shock.
- The microwave oven shall not be placed in a cabinet.
- The back of the oven must be placed against a wall.
- To keep the microwave oven at a safe distance from the wall, it is
necessary to install a distance limiter.
Clasp B
Push Distance Limiter
in this direction
1) Push Distance Limiter in the given direction;
2) Make sure Clasp A is secured to Hole A;
3) Insert Clasp B and Clasp C into their respective square holes.
Hole A
Clasp C
Hole A
Clasp A
Secure Clasp A to Hole A
Distance
Limiter
9