NEO SHIELD IP 6 Manual De Usuario página 7

Information
Store relevant information, as follows:
Information
RDM (Remote Device Management)
This fixture has RDM function. RDM is the protocol
which support two-way traffic in standard DMX512.
Configure and monitor fixture, like change DMX ad-
dress, DMX mode and so on. Every fixture with RDM
can be recognized by built-in UID code.
Parameter ID
DISC_UNIQUE_BRANCH
DISC_MUTE
DISC_UN_MUTE
DEVICE_INFO
SOFTWARE_VERSION_LABEL
DMX_START_ADDRESS
IDENTIFY_DEVICE
SUPPORTED_PARAMETERS
SENSOR_DEFINITION
SENSOR_VALUE
DMX_PERSONALITY
DMX_PERSONALITY_DESCRIPTION
RESET_DEVICE
FACTORY_DEFAULTS
Notice
1. If no press any button in 30s, it will lock screen
automatically and show current operating
mode, WDMX mode, temperature status and
battery(this battery is reference value, changes
for on and off is very large). Of course, it will
unlock again by pressing the mode and setup
button for 3s at the same time. Press mode and
setup button at the same time to quickly lock
under unlock status (Lock need to be YES in
Setting).
2. When the product power's on and shows
Versions: x.x.x
Temperature: xx°C
UID:xxxxxxxxxxxx
Discovery command SET command
*
*
*
*
*
*
*
*
version information, pressing the "MODE" and
"SETUP" buttons for some seconds at the same
time. After this, it can restore factory settings
and the data will be initialized.
3. In order to avoid any problem, please follow the
user manual to make sure it is in safety opera-
tions.
4. If the environment temperature is not in the
using range, please reduce the using time of
the full power to prevent products damaged
because of overheating.
5. When the product power is on, the LED display
screen shows temperature "×". Or it shows ×°C
Get command
*
*
*
*
*
*
*
*
*
P. 7
English version - Neo Shield IP 6