Symbols On The Machine; Operation Instructions; Prior To Washing; Open The Door - Primus C 6 Manual De Uso

www.groupdynamics-laundry.com
[email protected]

3. SYMBOLS ON THE MACHINE

EASY CONTROL MICROPROCESSOR (MCB EC)
PREWASH
MAIN WASH
RINSE 1
RINSE 2
RINSE 3
EXTRACT
DOOR RELEASE
FAULT

4. OPERATION INSTRUCTIONS

4.1. PRIOR TO WASHING

The manufacturer bears no responsibility for textiles being damaged by improper washing technologies.
The linen has to be assorted according to its type and a selected wash temperature. Empty all pockets;
nails, pins, screws etc. could damage the linen and the machine. To achieve better washing results, mix
large and small pieces and put the linen into the washer free and separated.

4.2. OPEN THE DOOR

Open the door using the button intended for it.

4.3. LOADING THE WASHER

Put the linen in the drum depending on the maximum capacity of the washer. Do not overload the washer
extractor. Overloading the machine can lead to a bad wash result. Half washing loads can obstruct a proper
function.

4.4. CLOSE THE DOOR

Close the door by pushing on the left side of the door till you hear a click. Watch your hands !

4.5. PROGRAM SELECTIONS

Choose one of the available wash programs, best corresponding to the quality of the garments and allowed
wash temperature in the wash load. Select the wash program using the button PROGRAM SELECT on the
control panel. The different washing programs are indicated on the control panel. The selection of the program
determines the temperature and the time for washing and rinsing. If you wish, you can adapt the wash programs.
(See programming manual).
516 568 PUBLICATION DATE 06/05
PROGRAM SELECT
CYCLE TIME
COIN / TEMPERATURE
FUNCTION BUTTON
START
RUN MODE
PROGRAM MODE
DOOR OPENING BUTTON
USER´S MANUAL 7