Acoustic Signal - LaserLiner ActiveFinder XP Manual De Instrucciones

6

Acoustic signal

To switch off acoustic signal:
Device is off: Press and hold ON/OFF button (2) until the detector
tip lights green.
Device is on: Press and hold ON/OFF button (2) until the detector
tip flashes green.
To switch on acoustic signal:
Press and hold ON/OFF button (2) until the detector tip flashes
green and a signal sounds.
Information on maintenance and care
Clean all components with a damp cloth and do not use cleaning agents,
scouring agents and solvents. Store the device in a clean and dry place.
Technical data
Indicator
Voltage range
Overvoltage category
Degree of protection
Power supply
Operating conditions
Storage conditions
Dimensions (W x H x D)
Weight (incl. batteries)
EU directives and disposal
This device complies with all necessary standards
for the free movement of goods within the EU.
This product is an electric device and must be
collected separately for disposal according to
the European Directive on waste electrical and
electronic equipment.
Further safety and supplementary notices at:
http://laserliner.com/info?an=acfixp
Subject to technical alterations. 02.2017
LED
12 VAC ~ 1000 VAC
Frequency 50 ... 60Hz
CAT IV - 1000 V
(non-condensing)
Pollution degree 2
IP 67
2 x 1,5 AAA (NEDA 24A/IEC LR 03)
0°C ... 50°C, Max. humidity
80% rH, no condensation,
max. altitude 2000 m
-10°C ... 60°C, Max. humidity
80% rH
160 x 24 x 30 mm
66 g
ActiveFinder XP
11
EN