Tabla de contenido
Idiomas disponibles
Idiomas disponibles
DISCO LIGHT
There are eight fl ashing modes of the disco light, press and hold the EQ/LIGHT button on
unit or press the LIGHT KEY on remote control to choose the desired mode: "LIGHT 01" to
"LIGHT 07",and "LIGHT 08" is auto-changing between diff erent color . To turn off the disco
light, press and hold the EQ/LIGHT button on unit or press the LIGHT KEY on remote control
until "LIGHT OFF" shows on the display.
RADIO OPERATION
TUNING RADIO STATIONS
1. Press the FUNC. button on unit or on remote control to select the TUNER FUNCTION,
this unit is designed for FM ONLY.
2. Tune to desired station by rotating the TUNING knob on unit or by pressing TUN+/
o TUN-/ I
key on remote control, the display will show the band frequency. Example:
FM 97.10 MHz. If the radio receive Stereo signal, "STEREO" will show on the display.
3. Extend FM TELESCOPIC ANTENNA to its full length and gently move the unit back and
forth to get the best reception, or place the unit in an open location.
4. To turn off the radio, press the FUNC. Button on unit or on remote control to switch to
other functions or press STANDBY button on unit or on remote control to turn off the
unit.
RADIO AUTO SCAN (SEARCH)
Press the
I I I I /PAIR button on unit or
scan and program until having found a strong signal. The unit will start to broadcast the
P01 after searching fi nished.
Press the
I I /+10 button on unit or FOLD./10/M UP/DOWN key on the remote control to
choose next programmed station.
RADIO STATION MEMORY OPERATION
You may pre-store 30 (FM) radio stations in memory for your preference, so as you can listen
to your desired station directly and quickly, no need to tuning and search for again.
1. Press PROG./P-MODE button on unit or press MEMORY KEY on remote control, "P01"
will fl ash on the display. Then rotate the TUNING knob on the unit or press TUN-/ I
TUN+/
I I on remote control to select the fi rst desired station.
2. Press PROG./P-MODE button on unit or MEMORY KEY on remote control, then press the
I I /+10 o I
/-10 on unit or TUN-/ I
the desired sequence you want to store, then press the PROG./P-MODE button on unit
or press MEMORY key on remote control again to enter.
3. Search another station, repeat steps (1) & (2) until all desired stations stored. Up to 30
stations can be programmed.
4. Press the TUN-/ I
to the stored station directly.
CD/MP3 OPERATION
Discs for Playback
This system can playback all digital audio CD/MP3, fi nalized digital audio CD-Recordable
(CD-R) discs, fi nalized digital audio CD-Rewritable (CD-RW) discs and CD-DA format digital
audio CD/CD-R/CD-RW discs.
I I I I key on remote control, the unit will conduct auto
o TUN+/
I I or FOLD./10/M UP/DOWN button on remote to listen
ENG
or TUN+/
I I key on remote control to choose
17
I I
or
Tabla de contenido
