Maintenance And Storage - Ribitech IW1200 Manual De Instrucciones Y Mantenimiento

V. OPERATION
5.1- Intended use
- The product is intended for domestic use.
- The product is intended for forward and reverse screwing (e.g. changing wheels, exhaust pipe,
shock absorbers, on lawnmowers or small motors)
5.2- Operation:
1. Connect product to a power source (refer to characteristics on product).
2. Wear appropriate protective equipment.
3. Prepare material for work
4. Secure material if necessary.
Do not use your own weight or body to hold material.
5. Firmly hold tool with both hands. Always maintain a balanced and secure position.
6. Place socket on material. Do not make sudden movements.
7. Press on rocker switch (2) [(R) or (F)] to start operation.
To stop tool, release rocker switch (2).
8. Once work is finished, stop product by releasing the switch (2).
Note: do not put down product until chuck has completely stopped rotating.
VI. MAINTENANCE AND STORAGE
Before any intervention on product, ensure that product is disconnected from
its power source.
6.1- Maintenance
Clean plastic parts with a soft clean cloth.
Do not use aggressive cleansers (solvents or abrasive cleansers), or an abrasive sponge.
Do not put or immerse product in water or any other liquid.
Clean ventilation holes with a soft brush.
6.2- Storage
Product must be stored in a dry location. Always lock up product and keep out of reach of children
6.3- Disposal
Do not dispose with household garbage. Do not throw into the environment.
Dispose of the tool in a collection centre for waste of electrical and electronic equipment, or a
waste drop-off centre; or seek advice from your local municipality.