Electrical Information - BOJ F-2500 Manual De Uso

4. If the deep fryer contains solid fat, allow the fat to solidify in the deep fryer and store the fat in
the deep fat fryer. Please refer to chapter of frying with solid fat for details.
5. Empty the fryer and clean the inner part of oil tank with a paper towel, then wipe with a wet
cloth dipped in soapy water. Wipe with a damp cloth and allow it to dry.
Warning: Never immerse the oil compartment (with power cord) in water and do not clean these
parts under running water.
6. Clean regularly the outer part of the fryer with damp clothe and dry it with a soft and clean
towel.
Note: Do not use abrasive detergents.
7. Clean the basket and the handle in warm soapy water. Dry thoroughly before reusing.
8. Dry completely before storage.
9. Store the appliance in a dry, well-ventilated position which is out of reach of children, when the
deep fryer is not in use.
10. Store in its original package when not using for a long time to avoid soiling.
Servicing
• There are no user serviceable parts in your fryer.
If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or a
similarly qualified person in order to avoid a hazard.
• Consult your dealer if you are ever in doubt about the operation if safety of your equipment.

Electrical information

Make sure that the voltage of your electricity supply is the same as that indicated on the ratings
plate.
When using electrical appliance, basic safety precautions should always be followed, including the
following:
Please read these instructions before use.
• Ensure that the voltage on the specifications plate is the same as the mains supply in your home.
• Ensure the oil is within the maximum and minimum marks in the pot when in use.
• Never immerse the fryer in water.
• Always unplug the fryer when not in use.
• Keep the fryer out of the reach of children.
• Do not leave unattended when the fryer is switch on.
• A thermal safety device automatically cuts off the power supply in case of a fault.
• Always allow the oil to cool before moving the fryer, as hot oil can cause serious burns.
• Do not move the fryer while in use.
• Do not use if the mains cord or plug is damaged. If the cord is damaged, it must be replaced by a
qualified service agent as special tools and parts are required to repair it.
- 3 -
English