Jocel JET-650 Manual De Instrucciones página 23

•
Then the weekly calendar appears (1 is for Monday and 7 Sunday). Set the day of that week in
course using the " " or " " and press "
•
Figure 8 show that the first two bars is for the first hour to set (0 to one in the morning) flash
intermittently. The weekly calendar indicates "1" for Monday (first day to program).
•
Press the mode button: day ("
this time interval. If you press night button, the symbol "
bar of the upper area will flash (figure 10). If you press anti-freezing button the symbol "
appear in the screen and the bar in the lower area will flash (figure 11). If you press day button,
" " will appear in the screen and two bars will remain flashing(figure 12). The first hour of
operation is already programmed.
•
Press " " and the bars for next hour start flashing (one to two in the morning). Select the mode
that you want for the time using the buttons day ("
press " " when the desired mode is chosen to pass on to the next time interval.
•
Perform the same operation until hour 24. It is always the same operation.
First with the day ("
determined time indicated by the flashing bars, and the " " button to move onto the next hour.
To return to the previous press " ".
Figure 10
Figure 12
•
When arriving at 24 hours and the working mode is chose by pressing " " , press "
finish the day's programming. The calendar date will move to 2 (Tuesday). Repeat steps 1 and
2 and press "
•
Continue this process until setting the 7 days of week. Once the program for the seventh day
was finished, pressing "
and the set program mode.
d) Re-set the time and the day
•
Unlocking the buttons, to press down "
The first two digits is for the time. Press buttons " " or " " to set the actual time and press
" " to keep the set. The second two is for the minutes. Press buttons " " or " " to adjust
the minutes and press "
"), night ("
"), night ("
" to end the day's schedule.
" the heater will automatically placed at the current day and time
" to keep the set.
" to set.
"), or anti-freezing ("
"), night("
"), or anti-freezing ("
Figure 11
" for a few seconds until the display shows "00:00".
-22-
") that you wish to have for
" will appear on the screen and the
"), or anti-freezing("
") button to chose the mode for
" will
") or
" to