Wall Mounting - Jocel JET-650 Manual De Instrucciones

Warning: To avid over heating, do not cover the heater.
A. STRUCTURE
Stands
B. ASSEMBLY
ASSEMBLY WITH STANDS
Place the legs at the bottom of heater in the first and last fins and screw them on. Shown as
following figure 1.

WALL MOUNTING

•
Before fixing heater on a wall, be sure that once unit installed it must be kept at a minimum
distance (shown in figure 2) from any objects (side wall, floor, furniture, ect.).
•
Then make 2 holes H1, H2 (diameter: 10mm; depth:60mm) in the wall, the location dimensions
of the holes are vary depending on the model of heater that you have bought. The dimensions
are as follows:
Model
JET-650
JET-1000
JET-1250
Figure 1
Figure 1
a (mm) b (mm)
415
565
715
-18-
e (mm)
73 220
73 372
73 524
Control panel
Radiating fins
Power switch
Temperature sensor
f (mm)
495
495
495