Smart Sensor Care; Cleaning The Dust Sensor - Winix HR1000 Manual De Instrucciones

Care and Maintenance

SMART SENSOR CARE

After replacing the filters, power on the
④
unit. Once the unit running, press and
hold the RESET button for 5 seconds.

4. Cleaning the Dust Sensor

For optimal performance of the Dust Sensor, which detects airborne dust and
ultrafine particles, clean it every two months. Clean it more frequently when the unit
is running in a place with high dust levels.
Open the Dust Sensor cover.
①
Use a damp cotton swab to wipe the
②
lens and intake area of the Dust Sensor.
To clean the sensor area, use only water. Do
x
not use volatile substances such as alcohol
or acetone.
Wipe away any remaining moisture with
③
a dry cotton swab.
English
5 seconds
Lens
Cotton
swab
18
HR 1000