Idiomas disponibles
Idiomas disponibles
Cleaning and Maintenance
The operator has to make sure that safety-relating and machine technical installations are inspected by an
expert after every four years in the course of an acceptance test.
The operator has to make sure that safety-relating and machine technical installations are inspected by a
skilled person once a year.
The following points have to be considered during the inspection:
1, All screws used for installing the devices or parts of device have to be tightly connected and must not be
corroded.
2. There must not be any deformations on housings, fixations and installation spots(ceiling, suspension,
trussing)
3, Mechanically moved parts like axles, eyes, and others must not show any traces of wearing(e.g. material
abrading or damages) and must not rotate with unbalances.
4, The electric power supply cables must not show any damages, material fatigue(e.g. porous cables) or
sediments. Further instructions depending on the installation spot and usage have to be adhered by a skilled
installer and any safety problems have to be removed.
We recommand a frequent cleaning of the device. Please use a moist,lint-free cloth. Never use alcohol or
solvents.
The objective lens will require weekly cleaning as smoke liquid tends to building up residues, reducing the light
output very quickly.
Technical Specifications
Power supply
Power consumption
DMX channel
DMX 512 connection
Sound-control
Flash rate
Number of LED
Dimensions(L*W*H)
Weight
Max ambient temperature Ta
Max housing temperature Tb (steady
state)
Min. distance from flammable surfaces
Min. distance to lighted object
Fuse
AC230V, 50Hz
50W
8
3-pin XLR
Via built in mic
18Hz
1*30W white Led
45℃
55℃
0.5m
0.1m
F2A,125V
