Main Function; Installation - Lacor BRISK 220 Serie Instrucciones De Uso

1.- Locate the unit at the proper counter height, in an area that
is convenient for use. The location should be level to
prevent the unit or its contents from accidentally falling, and
strong enough to support the weight of the unit.
2.- Do not place anything on top of BRISK blender, doing so
could damage BRISK blender or subject personnel to
possible injury.
3.- To avoid damaging the BRISK blender or causing personal
injuries, always operate the BRISK blenderr with products
inside.
4.- Unit is not weatherproof. For safe and proper operation
locate the unit indoors where the ambient air temperature is
a minimum of 70ºF (21ºC) and a maximum of 85ºF (29ºC).
5.- Do not locate the BRISK blender in an area subject to
excessive temperature or grease from grills, fryers, etc.
Excessive temperature could cause damage to the unit.
6.- Some exterior surfaces on the unit will get hot. Use caution
when touching these areas to avoid injury.
Mix or chop all kinds of food
UNPACKING
1.- Open the large box. Remove all packing materials and protective covering from the unit and
parts.
2.- Remove all accessories and book instructions.
3.- Place the device on a hard surface, flat and level.
4.- Please make sure that you clean all parts that come into contact with food with soapy water,
and then dry.
CAUTIONS
!

MAIN FUNCTION

INSTALLATION

45