Koenic KAC 12020 WLAN Manual De Instrucciones página 6

Size - A5
English
ACTIVATION, INSTALLATION AND USE OF
WLAN/IOT FUNCTIONS
REQUIREMENTS
SMARTPHONE
Operation system:
• Android (version 3.1 and above) or
iOS (version 6.1 and above).
• APP: Nethome Plus.
• Storage space: at least 20 MB.
• WLAN router: standard wireless router
providing 2.4 GHz signal; routers providing
5 GHz signal are not supported.
Smart speaker and smartphone app:
• Amazon Echo and Amazon Alexa App.
• Google speaker and Google Home.
• Google Assistant.
INSTALLATION
1. Download the software "NetHome
1
Fig.
Plus" from the App Store on iOS
system or GooglePlay® on Android
system and install it.
2. Open the App and sign in or create
a new account by following the
instructions of the app.
1. Connect the air conditioner to the
2
Fig.
mains and switch it on by pressing
the on/off switch.
2. Push the SWING button for 3
seconds to activate the WLAN mode
of the air conditioner. AP is flashing
in display.
3. Connect the air conditioner and the
WLAN router by using the app. Follow
the instructions of the App.
6
IM_KAC12020_WLAN_APP_191128_V05_HR.indb 6
CONNECTION BETWEEN AIR-
CONDITIONER AND ROUTER VIA
Nethome Plus APP
When you use an Android device:
3
Fig.
Activate the WiFi function of your
smartphone and open the Nethome
Plus app, choose your router, enter the
correct password and press the OK
button to connect.
Note:
• If you input a wrong password,
there will be no any information.
Repeat the previous steps again if
you find there is no response for a
long time.
• The air conditioner and
smartphone must be connected to
the same router.
When you have an Apple device:
The app will remind you to return to
the setting page of your iOS device to
connect the WLAN kit.
1. Choose the related WLAN named
with "net_ac_.... " on your mobile
phone and enter the password:
12345678.
2. Then go back to APP, click Next
button and choose your Router
name, enter the correct password,
press the OK button. Now
connection will be well done.
Note:
• The air conditioner and smartphone must
be connected to the same router.
• When pressing the network button
to start the connection between air
conditioner and router, the WLAN module
will quit AP mode and become a client of
WLAN. After establishing the connection
successfully, the air conditioner will keep
the connection to the router and store
this information. After power is off and on
again, the air conditioner will restore this
connection.
28/11/19 2:06 pm