Preparing The Reading; Inserting / Changing The Batteries; Setting The Date And Time - Hartmann Verova Instrucciones De Uso

English
GB

4. Preparing the reading

Inserting / changing the batteries

Open the battery cover on the underside of the device (see
Fig. 1). Insert the batteries (see Chapter 12 Technical data).
Ensure correct polarity ('+' and '–') when inserting batteries.
Close the battery lid.
date and time as described below.
If the 'Change battery' symbol
ed, blood pressure can no longer be measured and you must
replace all the batteries.
758.481_Veroval_Handgelenk-BPM_ES_PT_GB_LB3.indd 68 758.481_Veroval_Handgelenk-BPM_ES_PT_GB_LB3.indd 68
Fig. 1
or flashes on the display. Set
is permanently illuminat-

Setting the date and time

Be sure to set the date and time correctly. This is the only
way to save your measured values correctly with date and
time for subsequent retrieval.
To switch to setting mode, reinsert the batteries or hold the
START/STOP button
follows:
Hours
The hour format flashes on the display.
• Select the desired hour format using the
Save buttons /
the START / STOP button
68
down for 5 seconds. Proceed as
and confirm using
.
26.03.20 08:33 26.03.20 08:33