Install Indoor Unit - Gabarron IGMBMA-K3DNB7I Manual De Usuario

Install indoor unit

1. Mounting plate should be installed horizontally. As the water tray's outlet for the indoor unit is two-way
type, during installation, the indoor unit should slightly slant to water tray's outlet for smooth drainage of
condensate.
2.Fix the mounting plate on the wall with screws.
3.Be sure that the mounting plate has been fixed firmly enough to withstand about 60 kg. Meanwhile, the
weight should be evenly shared by each
07、09K UNIT:
(Rear piping hole)
12K UNIT:
(Rear piping hole)
18K UNIT:
(Rear piping hole)
1.Slant the piping hole (
outdoor side.
2.Insert the piping-hole sleeve into the hole to prevent the connection piping
and wiring from being damaged when passing through the hole.
Install of Mounting Plate
screw.
Wall
Mark on the middle of it
Space
to the
wall
1 5 0mm
above
Left
Φ55mm
Wall
Mark on the middle of it
Space
to the
wall
1 5 0mm
above
Left
Φ55mm
Wall
Mark on the middle of it
Space
to the
wall
1 5 0 m m
above
Left
Φ55mm
Drill Piping Hole
55) on the wall slightly downward to the
Ф
Gradienter
(Rear piping hole)
Gradienter
(Rear piping hole)
Gradienter
(Rear piping hole)
21
Wall
Space
to the
wall
150mm
above
Right
Φ55mm
Wall
Space
to the
wall
150mm
above
Right
Φ55mm
Wall
Space
to the
wall
1 5 0 m m
above
Right
Φ55mm
Outdoor
Indoor
Wall pipe
Seal pad
Ф
55