Tabla de contenido
Idiomas disponibles
Idiomas disponibles
PRODUCT OVERVIEW
Front Panel
1.
TWEETER: The tweeter outputs the high frequency
content.
2.
WOOFER: The woofer outputs the low frequency
content.
3.
LED: The LED illuminates Blue when the speaker is
powered on, Red when it is in standby mode, and is Off
when power is not connected.
Rear Panel
1.
XLR: The XLR jack accepts balanced or unbalanced XLR
signal connections.
2.
TRS: The TRS jack accepts balanced or unbalanced TRS or
TS signal connections.
3.
RCA: The RCA jack accepts unbalanced RCA signal
connections.
4.
PORT: This port aids in reproduction of very low
frequencies by discharging frequencies below 60Hz and
to act as a cooling mechanism to prevent overheating.
This port should not be blocked. The speaker should be
placed at least 3" away from any wall to allow the port
to "breathe" properly. Otherwise, low frequency
reproduction will be adversely affected.
5.
VOLUME: Use the volume control to set the output to the desired volume level.
6.
POWER: The power switch turns the speaker on or off.
7.
AC IN: IEC 60320 C14 panel connector for connecting the included AC power cord. The
speaker accepts AC power from 100 ~ 240 VAC, 50/60 Hz.
8.
FUSE: The fuse holder holds the speaker's fuse. The proper fuse type is listed underneath
the fuse holder. Always physically disconnect the speaker from AC power before replacing
the fuse.
7
Tabla de contenido
