User's Manual (English)
SAFETY WARNINGS AND GUIDELINES
Please read this entire manual before using this device, paying extra attention to these safety
warnings and guidelines. Please keep this manual in a safe place for future reference.
This device is intended for indoor use only.
•
Do not expose this device to water or moisture of any kind. Do not place drinks or other
•
containers with moisture on or near the device. If moisture does get in or on the device,
immediately unplug it from the power outlet and allow it to fully dry before reapplying
power.
Do not touch the device, the power cord, or any other connected cables with wet hands.
•
If operating this speaker in a humid environment, ensure that no condensation occurs.
•
Condensation could cause damage to the speaker cone and could cause a short in the
amplifier, which in turn could cause fire or severe electric shock.
Do not install this device on an unstable surface where it could fall and cause either
•
personal injury or damage to the device and/or other equipment.
When installing this device, ensure that the mount is sufficiently robust to support the
•
weight of the unit and to prevent unwanted movement.
Do not expose this device to excessive vibration.
•
Do not stack these speakers in such a way that they could fall on people or animals if they
•
were to become dislodged.
Do not expose this device to excessively high temperatures. Do not place it in, on, or near
•
a heat source, such as a fireplace, stove, radiator, etc. Do not leave it in direct sunlight.
Do not place or install this device in an area where it can be exposed to excessive amounts
•
of dust, humidity, oil, smoke, or combustible vapors.
Prior to operation, check the unit and power cord for physical damage. Do not use if
•
physical damage has occurred.
Before plugging the unit into a power outlet, ensure that the outlet provides the same
•
type and level of power required by the device.
This device uses a grounded power cord and requires a ground connection for safe
•
operation. Ensure that the power source has a proper ground connection. Do not modify
the plug or use a "cheater" plug to bypass the ground connection.
Disconnect the unit from the power source when replacing the fuse. Replace the fuse only
•
with the same type.
5