Dirna SUN 150086000E Instrucciones De Montaje página 14

SUN
EN
IMPORTANT
!
THE CONNECTION CABLES MUST BE
MORE THAN 7m LONG.
For the unit to operate, it must be suitably
2
located in order to make use of the flow
of heat, and the correct connection and
installation of the power cables is also
necessary.
To this end, the following optional kits are
available:
150086024K -
Power cabling kit 24V
150086012K -
Power cabling kit 12V
150086002K -
Support kit.
3
Use the support KIT for suitable anchoring of
the unit.
This support kit includes the supports
necessary to secure the heating unit in the most
appropriate position as required in each case
(1, 2 or 3); see the pages below.
IMPORTANT
!
1 - The electrical heating unit must be
installed in areas which are protected
from moisture and water.
2 - Protect the cables from sharp objects,
high temperatures, moisture and water.
3 - For SAFETY REASONS, always
turn off and disconnect the electrical
equipment before any intervention.
4 - DO NOT TOUCH the resistors when
the unit is running.
5 -TAKE CARE not to cover the air
outputs when the unit is running.
IMPORTANT
!
PAY SPECIAL ATTENTION TO THE
BATTERY CONNECTION CABLES
SECTION.
In 12 V :16 mm² and 24 V:10 mm²
2
3
2
14
dirna
, s.a.
1
3