Graco AFFIX Manual De Uso página 18

lap belt portion MUST pass under the armrests and
be positioned low on the hips.
Belt MUST NOT be twisted.
24
If the belt lays across child's neck, head or face, readjust head support
height. Follow instructions, "Adjusting the Head Support" .
25
Adjusting the Head Support
BEFORE adjusting the head support height, have your child lean
forward slightly.
26 Squeeze the red adjustment button on top of seat and pull back support up
until it snaps into one of the 6 height positions.
27
To lower, squeeze red adjustment button and push down.
CHECK to make sure it is securely snapped into one of the 6 height
positions by pulling up on head support.
28 Attach connectors to vehicle lower anchors.
29
NEVER put two connectors on one vehicle anchor.
30
retain the restraint during an impact, when it is not being used.
31
32
To remove booster, lift release levers on sides of booster and pull slightly
away from seat.
33
Push connector in, lift connector up and pull out (away from anchor point).
Repeat on other connector.
18