Stanley SDR1400 Manual De Instrucciones página 19

f Injuries caused by prolonged use of a tool.
When using any tool for prolonged periods ensure
you take regular breaks.
SAFETY OF OTHERS
f This appliance is not intended for use by persons
(including children) with reduced physical, sensory
or mental capabilities, or lack of experience
and knowledge, unless they have been given supervision
or instruction concerning use of the appliance by
a person responsible for their safety.
f Unpack all parts and lay them on a flat, stable surface.
VOLTAGE DROPS
Inrush currents cause short-time voltage drops. Under
unfavorable power supply conditions, other equipment may
be affected. If the system impedance of the power supply
is lower than 0,34 Ω, disturbances are unlikely to occur.
USING AN EXTENSION CABLE
f Always use an approved extension cable suitable
for the power input of this tool (see technical data).
Before use, inspect the extension cable for signs
of damage, wear and ageing.
f Replace the extension cable if damaged or defective.
When using a cable reel, always unwind the cable
completely. Use of an extension cable not suitable
for the power input of the tool or which is damaged
or defective may result in a risk of fire and electric shock.
FEATURES (Fig. A)
1. Air vents
2. Handle (left and right)
3. Socket
4. Shaft
5. Stirrer
6. Lock-on button
7. Variable speed switch
8. Power cord with plug
9. Mounting spanner 22mm (x 2)
ASSEMBLY
Unpacking
f Unpack all parts and lay them on a flat, stable surface.
f Remove all packing materials and shipping devices,
if applicable.
f Make sure the delivery contents are complete and free
f of any damage. If you find that parts are missing
or show damage do not use the product but contact
your dealer. Using an incomplete or damaged product
represents a hazard to people and property.
f Ensure that you have all the accessories and tools
needed for assembly and operation. This also includes
suitable personal protective equipment.
Warning! The product and the packaging are not
children's toys! Children must not play with plastic bags,
sheets and small parts! There is a danger of choking
and suffocation!
Setup
Warning! The product must be fully assembled before
operation! Do not use a product that is only partly assembled
or assembled with damaged parts! Follow the assembly
instructions step-by-step and use the pictures provided
as a visual guide to easily assemble the product! Do not
connect the product to power supply before it is completely
assembled!
Stirrer
Warning! Stirrers are available in different types and
with different shape and diameters. Always use the correct
stirrer according to the intended use! Observe the technical
requirements of this product (see section "Technical
specifications") when purchasing and using stirrer! Stirrer
becomes hot during use! Handle them carefully! Wear
protective gloves when handling stirrer in order to avoid
injuries like burns and cuts!
Attaching (Fig. B, C, D and E)
f Align the stirrer (5) with the shaft (4). Screw the stirrer
(5) clockwise onto the lower end.
f Lock the welded nut of the shaft (4) with one mounting
spanner (9) and secure the stirrer (5) clockwise with
the other (9) gripping the welded nut (Fig. B).
Note: Tighten the connection hand tight at first, before
using the spanners.
f Align the shaft (4) with the socket (3). Screw the shaft
end with welded nut clockwise into the socket (3)
(Fig. D).
f Lock the socket (3) with one mounting spanner (9)
and secure the shaft (4) clockwise with another mounting
spanner (9) gripping the welded nut (Fig. E).
Note: Tighten the connection hand tight at first, before
using the spanners.
Removing/Replacing (Fig. F and G)
f Lock the socket (3) with one mounting spanner (9)
and loosen the shaft (4) anticlockwise with another
mounting spanner (9) gripping the welded nut (Fig. F).
f Loosen the welded nut anticlockwise (Fig. F)
and remove the shaft (4) from the socket (3) (Fig. G).
Stirrer (Fig. H and I)
f Lock the welded nut of the shaft (4) with one mounting
spanner (9) and loosen the stirrer (5) anticlockwise with
another mounting spanner (9) gripping the welded nut (Fig. H).
f Loosen the welded nut anticlockwise (Fig. H)
and remove the stirrer (5) from the shaft (4) (Fig. I).
f Attach a new shaft/stirrer as required.
ENGLISH • 19