Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Fig .19
CLEARING A BLOCKED TUBE /IMPELLER
1. Put the ignition switch in the OFF position (O) (Fig. 10) and wait for the impeller to stop rotating.
2. Disconnect the spark plug wire to prevent the unit from starting.
3. Remove the blower/vacuum tube and the vacuum bag.
4. Carefully remove material blocking the tube or impeller. Inspect the blades to assure no damage has
occurred. Rotate the impeller blades by hand to assure the blockage is completely cleared.
5. Reinstall the vacuum bag and blower/vacuum tube.
6. Reconnect the spark plug wire.
EMPTY THE VACUUM BAG
1. While pressing the latching tube on both sides of the vacuum bag tube. Pull the vacuum bag off the
unit and use 4 screws lock it. (Fig.20)
Fig.20
2. Detach the vacuum bag from the vacuum bag hook.
P-15
Tabla de contenido
