Weller BP650 Manual Del Usuario página 2

BP650 Cordless
Battery Powered
Soldering Tool
Thanks you for purchasing the BP650 battery powered
cordless soldering tool from Weller. This is the latest in
a line of both cordless and corded soldering and hot
air tools from Weller - the world's leading maker of
soldering products. With proper care, your BP650 tool
will give you years of reliable service.
BP650 is a lightweight, fast heat-up soldering iron
ideal for field service work where electricity is not
readily available. The heating element coil is contained
in the tip for super-fast heat-up. Use this tool for light
duty soldering jobs where portability is necessary.
Safety Notes
1.Always place the soldering iron in the original
holder.
2.Remove all inflammable objects from the proximity
of the hot soldering tool.
3.Use suitable protective clothing. Risk of burns from
liquid solder.
4.Never leave the hot soldering iron unsupervised.
5.Never work on voltage-carrying parts.
6.Tip is HOT! Do not touch the tip or you may get
severely burned.
7.Do not immerse in water!
8.Allow the tip to cool after use before storing away.
9.Place the protective cover over the tip when storing
so that the cover secures the safety slide switch in
the "OFF" position.
Operating Instructions
1.To install batteries, remove the battery cover by
pinching the clips on the sides of the battery cover
and lifting off.
2.Place (3) 1.5 V size AA alkaline batteries (included)
into the iron as illustrated and replace the cover.
3.Remove the protective cover from the tip.
4. Make sure the tip is securely installed.
5. Slide the ON/OFF switch to the "ON" position.
6.Place the hot soldering iron standing upright so the
tip does not come in contact with surrounding
objects.
7.After soldering, slide the switch to the "OFF"
position and replace the protective cover.
Maintenance
1.If it takes more than 60 seconds to reach working
temperature, install fresh batteries.
2.Use alkaline batteries for best results. Do not mix
old and new batteries.
3.Do not change the soldering tip when hot. Use the
tip exchanger provided to remove the tip as shown.
4.The soldering tip is iron plated for long life. Do not
file the tip as filing will destory the plating.
5.Remove the batteries from the tool when not using
for prolonged periods to prevent batteries from
leaking into the tools.
Weller Consumer Soldering Iron Warranty
Apex Tool Group warrants this product will be free
from defects in material and workmanship for a
period of two (2) years from the date of purchase. No
warranty is made with respect to products which
have been (a) altered, modified or repaired by anyone
other than Apex Tool Group; (b) subject to abuse,
improper use, negligence, accordance with normal
practices or the instructions and specifications of
Apex Tool Group;
(c) used in conjunction with any product, device,
component or system, that is either defective, the
source of a defect, or not reasonably intended to be
used in conjunction with this product.
The foregoing limited warranty is exclusive and in lieu
of all other warranties, whether expressed, implied or
statutory, including, but not limited to, any warranty of
merchantability or fitness for any particular purpose.
The obligation of Apex Tool Group under this limited
warranty is expressly limited to repairing the product,
refunding the purchase price or replacing the product,
at the sole and absolute discretion of Apex Tool
Group, at no charge to Buyer.
The remedies provided for herein shall constitute the
sole recourse of Buyer againsts Apex Tool Group,
wheter the claim is made in tort or in contract,
including claims based on warranty, negligence, strict
liability, deceit, fraud, misrepresentation or otherwise.
In no event shall Apex Tool Group be liable for special,
indircet, incidental or consequential damages
(regarless of the form of action), nor for lost profits.
Apex Tool Group liability for any claims or damages
arising out of or connected with the manufacture,
sale, delivery, use, maintenance, repair or modificati-
on of this product shakk not exceed its purchase
price.
Apex Tool Group will, during the warranty period,
repair, replace or refund the purchase price of any
product found to be defective in accordance with this
limited warranty.Return freight prepaid with proof of
purchase to:
Apex Tool Group B.V.
Phileas Foggstraat 16
7821 AK Emmen Drenthe
The Netherlands
Phone: +31 (0) 591 667 500
Fax: +31 (0) 591 667 595