protect.Clavicle support
Intended purpose
protect.Clavicle support is a brace for the clavicle. The product is
exclusively to be used for the orthotic fitting of the collarbone and only on
unbroken skin or any wounds have been properly covered.
Indications
• Post-traumatic and postoperative fractures
• Acromio-clavicular luxation
Contraindications
• Constriction of the airways
• Compression of the vascular nerve bundle
Instructions for use
Please wash before first use. No measuring, cutting, padding and tying as
with the traditional tubular support.
1. Put part A of the device over the head and place parts B and C over the
shoulders (see Figure 1).
2. Pull straps B and C under the arms and through the appropriate slots
(see Figure 2).
Care instructions
Close the hook and loop fasteners before washing. Soap residues can
cause skin irritations material wear.
• Wash the product by hand, preferably using a medi clean detergent, or
in delicate cycle at 30°C using a mild detergent without fabric
• conditioners.
• Do not bleach.
• Leave to dry naturally.
• Do not iron.
• Do not dry clean.
Storage instructions
Keep the product in a cool, dry place and do not expose to direct sunlight.
Material composition
Polyester, cotton, polyamide
Liability
The manufacturer's liability will become void if the product is not used as
intended. Please also refer to the corresponding safety information and
instructions in this manual.
Disposal
The product can be disposed of in the domestic waste.
English