Triton Blue ArtNet-DMX 8 Manual De Usuario página 13

i
ndicators
On the front panel there are indicators described as below.
Indicators
LINK
DATA
DMX 1
DMX 2
Signal Out
s
oftware updating
To update software, do the followings:
1. Format your USB stick under FAT mode.
2. Copy the new software to the root directory of your USB stick.
3. Insert USB stick in the USB port in the front panel.
4. Press Menu button till "System setup [new software]" shows on display.
5. Press button to update software.
USB port for software updating via USB-stick only. Do not connect any peripheral device
(mouse, keyboard or similar).
s
pecIfIcatIons
• Power Input: AC 100-240V 50-60Hz
• Power consumption: 6W
• Data inputs: Ethercon and 3 pin XLR In (or 5 pin)
• Data outputs: 8 x 3 pin XLR Out (or 5 pin)
• Data Thru: EtherCon
• Dimension: 482 x 168 x 44 (1U rack mount)
• Weight: 2,2 Kg
IMPORTANT INFORMATION!!!
In order to optimize the recovery and recycling of the materials that old appliances contain
and reduce the impact on human health and the environment, ensure that this product is
recycled at the end of its life.
Behavior Meaning
Solid Ethernet IN is connected to ArtNet source.
Blinks Unit receives ArtNet signal
Solid DMX IN-1 is connected to DMX source
Solid DMX IN-2 is connected to DMX source
Solid DMX OUT ports output DMX signal
User Manual | ArtNet-DMX 8 Triton Blue | Rev. May.2015 | www.triton-blue.com
13.