Adjusting The Feet; Electrical Connection - Teka NFE2 420 INOX Manual Del Usuario

Installation

3.3. Adjusting the feet

If the product stands unbalanced after
installation, adjust the feet on the front by
rotating them to the right or left.

3.4. Electrical connection

A
WARNING:
connections via extension cables or
multi-plugs.
B
WARNING:
must be replaced by the Authorized
Service Agent.
C
If two coolers are to be installed side
by side, there should be at least 4 cm
distance between them.
Our company shall not be liable for
•
any damages that will arise when the
product is used without grounding and
electrical connection in accordance with
the national regulations.
Power cable plug must be within easy
•
reach after installation.
Connect your refrigerator to a grounded
•
outlet rated for a voltage value of 220-
240V /50 Hz. Outlet shall have 10 to
16A fuse.
Do not extension cords or cordless
•
multiple outlets between your product
and the wall outlet.
Do not make
Damaged power cable
10 /37 EN
Hot Surface Warning!
Side walls of your product is
equipped with refrigerant pipes
to improve the cooling system.
Refrigerant with high temperatures
C
may flow through these areas,
resulting in hot surfaces on the
side walls. This is normal and does
not need any servicing. Please
pay attention while touching these
areas.
Refrigerator / User Guide