Power; Basic Functions; Setting Alarm - ECG XMS 333 U Manual De Instrucciones

POWER

The device requires DC 9V DC power supply 2000 mA. The polarity of the DC connector:
Connect the cable of the supplied power adapter into the jack at the rear of the unit and the plug of the
adapter into a suitable power outlet 100–240 V AC.
For the device to function it has to be connected to a power supply. The device cannot be powered by batteries.

BASIC FUNCTIONS

Turning the device on and o
1. Connect the device to power supply as described above.
2. The device is in a standby mode now, the display shows clock.
Turn on the device by pressing STANDBY (3 on the device or wl on the remote control).
3.
If you want to switch the device in the standby mode, press again the button STANDBY.
4.
Setting the time
You can set the clock only in the standby mode.
GB
While the device is in the standby mode press the button CLK SET. The time format will appear.
1.
2. Using the buttons
3. Press again CLK SET. The hours begin to ash.
4. Using buttons
Press again CLK SET. The minutes start to ash.
5.
6. Using buttons
7. Press again CLK SET to con rm the set time. The clock is now set.

Setting alarm

The alarm can be set only in the standby mode.
The device allows to set two di erent alarm clocks. You can select CD playback, radio or buzzer alarm.
While the device is in standby mode, press and hold for 2 seconds the button ALARM1 or ALARM2. The
1.
symbol or
2. Using buttons
Press again ALARM1 or ALARM2. The minutes start to ash.
3.
4. Using buttons
5. By repeated pressing ALARM1 or ALARM2 select the alarm mode.
6. Use buttons
Activation/deactivation of the alarm
• If you want to activate previously set alarm clock, press the appropriate button ALARM (1 or 2) in the
standby mode. The display shows the alarm clock symbol
If you want to deactivate the alarm clock, press the appropriate button ALARM (1 or 2) in the standby
•
mode. The alarm clock symbol
will not sound.
Checking the alarm clock
Press INFO to nd out to what time and mode are the alarm clocks set.
•
Stopping the sounding alarm
When the alarm sounds, press ALARM1 or ALARM2 to stop it. The alarm clock icon disappears from the
•
display. To make the alarm clock functional for the next day you have to activate it again.
40
40
XMS 333 U_manual_cz_sk_pl_hu_de_gb_hr_si_sr_fr_it_es_et_lt_lv.indb 40
/
choose between the 12 h and 24 h format.
/
set the hour.
/
set minutes.
and the hour start ashing.
/
set the required hour.
/
set minutes.
/
to select between CD, radio or buzzer.
or
or . The alarm will sound in preset time.
disappears from the display. The alarm is now deactivated and
17.07.2016 16:10:31