Troubleshooting - Trueshopping SFGT00B3SA Manual De Instrucciones

TROUBLE SHOOTING
The following form lists the common operating system with problem and solutions. Please read the form
carefully and follow it.
PROBLEMS
Motor fails to start when
switch trigger is
depressed.
Line will not feed
Poor cutting performance Check the cutting line
POSSIBLE CAUSES
Check battery charger
Check power button
Check spool
Replace spool
16
SOLUTION
Recharge
Push button.
1. Check line is not tangled or jammed in
the spool.
2.Remove the line and replace the spool
of the line and ensure the mechanism is
clean.
1. Check the cutting line is fully
extended.
If not:
2. Manually extend the line or stop and
start the trimmer until the line has
been extended to the line cutter.
3.Make smaller cuts, This is a light
duty trimmer.
4.Ensure line is fully extended.