HSM shredstar Serie Instrucciones De Servicio página 9

5 Operation
Switching the paper shredder on
• Press the rocker switch „I".
 T he rocker switch locks in place.
 The green LED lights up.
 The paper shredder is ready for
operation (standby).
Shredding paper and credit cards
• Feed in only one credit card
or no more than 15 sheets of
paper.
 The light barrier starts the
cutting unit automatically.
 The material is pulled into the
cutting unit and shredded.
 Three seconds after the
feed opening is clear again,
the shredder switches off
automatically and goes into
standby.
6 Troubleshooting
LED-indicator
No LED lights up
Both LEDs light up
The red LED fl ashes Overheating
Only the red LED
lights up
For any other malfunctions, switch off the machine and get in touch with our customer service.
01/2013
Cause Remedy
- Place the cutting head correctly on the base cabinet
and push the containers for shredded paper and CDs in
properly.
Press "I" on the
The shredded Empty the container.
paper container If you take the cutting head off the base cabinet, take
is full care not to damage the fl ap on the bottom of the cutting
head.
The maximum uninterrupted operating time is fi ve
minutes. Let the machine cool down for around
20 minutes.
Paper cutting Press "R" on the switch.
unit overloaded Note: The cutting unit starts up with a delay of two
seconds.
Remove the paper.
Do not feed in more than 15 sheets of paper at a time.
shredstar X15_X18
english
Shredding CDs
The CD is cut into fi ve strips.
The shredder switches off.
Switching the paper shredder off
• Press the rocker switch "R".
 The rocker switch locks in place.
switch.
The machine is equipped
with a separate CD
cutting unit. Push the CD
into the feed opening
until the cutting unit
catches it.
9