KERN KMN-TM Manual De Instrucciones página 24

F1.3.3 – Adjustment
The steps with grey background only appear if parameter F1.3.2=LinOn is set.
Display Key
E SCL
10 CAL
...
0 CAL
Add Ld
000000
003000
10 CAL
...
0 CAL
FULL Ld
000000
006000
10 CAL
...
0 CAL
donE
F1.4
Description
Unload weighing platform
Confirm empty weighing platform
The weighing terminal counts down from 10 to 0.
Zero is determined
Load half maximum load
Confirm half load
Enter weight value for half maximum load
Enter weight value
Weight value for half maximum load entered
Confirm weight value
The weighing terminal counts down from 10 to 0.
Half maximum load is adjusted
Load maximum load
Confirm maximum load
Enter weight value of maximum load
Enter weight value
Weight value for maximum load entered
Confirm weight value
The weighing terminal counts down from 10 to 0.
Maximum load is adjusted
Adjustment finished. This message is displayed for
about 2 seconds
Next block in the supervisor menu
23